NHXH – FE180-E90 0.6/1kV
 BS EN 60332-3-24 / BS EN 50266-2-4

Description

Application

Safety cables are used in all locations where a high degree of protection against fire and fire-damage has to be provided for human life and equipment and are, therefore, subject to high security requirements. These cables may be used indoors and outdoors. They may not be installed directly into the ground or into water. Fire resistant to FE 180 and Circuit Integrity to E 90.

Construction

Conductor
Solid or stranded copper conductor
Class 1 solid copper conductor
Class 2 stranded copper conductor

Insulation
Halogen-free, similar ceramic polymer Type HXI 1

Inner Sheath
Halogen-free compound

Outer Sheath
Halogen-free polymer Type HM 4

Cable Standards

rohs-cable-standard
iec-cable-standard
ce-cable-standard

The electrical and dimensional properties of this product are measured by the Technical and Quality Assurance department at the National Cable Factory laboratory. Cable performance in respect of conductor resistance, construction quality (workmanship), dimensional consistency, and other parameters are verified to published standards and approved product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed.

Characteristics

Voltage Rating (Uo/U)
600/1000V

Test Voltage
4000V AC

Temperature Rating
-5°C to +90°C

Operating Temperature
+250°C

Short Circuit Time
5 sec.

Minimum Bending Radius
12 x overall diameter
15 x overall diameter

Outer Sheath Colour
Orange

Size, Weight & Electrical Specification

Loader Loading...
EAD Logo Taking too long?
Reload Reload document
| Open Open in new tab

Download [275.00 KB]